mojokeron.blogg.se - Epson 3880 printer specs

#Epson 3880 printer specs install#
#Epson 3880 printer specs manual#
#Epson 3880 printer specs pro#
#Epson 3880 printer specs software#

Yes, the P600 produces smaller prints, but the P800 isn’t a whole lot bigger than the 13-inch model.

#Epson 3880 printer specs pro#

Now, several months after the P600 announcement, Epson has announced the SureColor P800-a 17-inch printer that replaces the popular Stylus Pro 3880 and utilizes the same new UltraChrome HD ink set as its smaller sibling.īefore we get into the nitty gritty of the P800, referring to the P600 as its “smaller” sibling is a bit misleading. But we wanted to print larger sizes than the P600 can accommodate with its 13-inch maximum output width. The P600 offers lots of bells and whistles (including Wi-Fi and a roll feed), a new inkset and, most importantly, print quality that exceeded our already high expectations during hands-on testing. That’s only one of the reasons we were so excited when Epson announced the 13-inch SureColor P600 Professional Photo Printer at the end of October (the SureColor name replaces the Stylus Pro branding). *** Warm and cool split-tone, change black ink for matte or gloss printing, can also print digital negatives.Unlike the fast-paced cycles of other digital products, new inkjet printer announcements are few and far between. Use 3800-3880-PiezoDN-P2 curve folder for digital negatives with this inkset. ** NO need to change black ink, can also print digital negatives. Use 3800-3880-PiezoDN curve folder for digital negatives with this inkset. * Change black ink for matte or gloss printing.

Verify that you have a perfect nozzle check pattern before printing images.

Follow this by printing another gradient to make sure color is gone before printing images. If color staining is present, do another Power Clean Cycle or a few regular cleaning cycles. Yellow, which is the worst for color staining, will show up in the highlights. Print a nozzle check to make sure all positions are fully printing, then print a test gradient and examine it for color staining.

Perform 3 Power Clean Cycles after installing carts to purge color ink and get Piezography ink from carts to the print head.

Follow this by lifting up on the back of all carts, then close the cartridge bay door. If this is the case, open the cartridge bay door, then push firmly on the cartridge that is not being recognized. If you see a red light or cartridge error on the LCD at this point, one or more chips has not been recognized or seated correctly. When it stops, the green power light should be on and “ready” displayed on the printer LCD panel.

#Epson 3880 printer specs install#

Open the cartridge bay door, remove Epson cartridge(s) and install refillable cart(s) into printer (please refer to the refillable carts instructions for the correct way to fill and prime), then close the cartridge bay door.

Test the printer with Epson inks to verify that it functions perfectly, as described above.

#Epson 3880 printer specs manual#

A full manual for Piezography can be downloaded with the free Piezography Community Edition.

#Epson 3880 printer specs software#

This software has quickly become a defacto utility for anyone wanting to properly color manage their printing workflow.

Additionally, Piezography on the Mac requires the use of Print-Tool. We provide our own guides to our suggested use of QuadToneRIP, so that you can get the best results from that product. Installation instructions and support of that software is provided by the manufacturers of those software. Most Piezography systems depend upon the QuadtoneRIP software with which to control the ink shades.

You must refer to the shade placement chart provided here on this document. Whether you use refillable cartridges, CIS, or pre-filled cartridges (available outside the USA), the placement of the shades of Piezography ink are critical and not arbitrary.

If you lost your refillable cartridge instructions, please go to our main support page to view the cartridge instructions. If you are installing user refillable cartridges, please refer to the installation instructions provided with the refillable cartridges. If you are installing a Continuous Ink System (CIS), please refer to the installation instructions provided with the CIS. Use these procedures to convert your color printer to a Piezography printer.